DIY Wind Turbine 👍 Most Popular Wind Turbine Making Video

DIY Wind Turbine | How to Make Tutorial | Homemade Wind Turbine | Project Guide for Kids

Read text version here :

I have been thinking to make wind turbine (a large horizontal axis one) since I first published a small wind turbine video on youtube and a blog post here a few years back. That video went viral. Then I decided to make one large functional wind turbine. The former didn’t give me even 1.5 volts. I know building a medium sized wind turbine will take a lot of time to complete. But, It didn’t, I’ve Just finished a medium sized wind turbine with only 5 days, 2 hours per day after my regular work. By the way, Here I am going to give you an overview of my experience in making this wind turbine Project.

Make Wind Turbine

1.Propeller Making

A propeller is the most important part of a wind turbine. The propeller is used to convert wind energy to rotational energy. This rotational energy can easily be converted to electricity by coupling it with a dynamo. Wind turbine blade should have appropriate curvature and weight to get maximum efficiency. So, I bought 6mm thick, 8 Inch Heavy duty PVC pipe ($5). Then I used a hand grinder to cut it into wind turbine blade shape with 1:3:20 ratio.

You can easily make rotor to connect these blades using a Plate washer, Nut, and GI L-clamps.

Take 8 inch, 4mm PVC Pipe

Cut it into blade shape 1:2:30 Ratio as shown in the figure

Smoothen the edges.

Take a 3 Inch washer and weld GI Pieces on It.

Screw PVC blades On it.

2.Turbine base Making

Another important function of a wind turbine is its ability to face the wind automatically. Otherwise, it won’t be able to maximize the wind energy harvesting. This mechanism is called yaw mechanism. It works with the help of a flexible turbine base and a tail. I used a johnson wheel to make this flexible joint.

The tail will help the propeller to face the wind. As a result, we will get maximum output. We can cut aluminum sheet very easily to any shape. Cut it to a proper shape.

Take a Johnson wheel and remove the wheel

Weld it to one side of a 1″ square GI Pipe (1.5m)

Connect bearings in a Piece of GI pipe and Place it on the johnson wheel.

Weld a hose clip on it to fix dynamo.

3. Tail Making

The tail will help the propeller to face the wind. As a result, we will get maximum output. We can cut aluminum sheet very easily to any shape. Cut it to a proper shape.

Cut aluminum sheet into wind turbine tail shape

Screw it on a GI Piece

Fix the tail on Wind turbine Base


Keep in Mind that safety must be the first priority. If you are not familiar with angle Grinder, I strongly recommend you not to use it. In any case, children should not experiment with it. Also, when welding you should wear eye protection glasses, face shield, and hand gloves. Ask professional welders to get your work done. That would be better. I have worked as a welder and wireman two years, so I have some experience it such things. Thank God.

4. Assemble Each Component together

Watch Video Closely to assemble each Component Together. Make sure the crank wheel and flywheel align straight. Then Connect the output to a battery or multimeter. Place the wind turbine outside where the wind blows.

That’s It, make wind turbine Project is ready


Раха Маха says:

Чё за порнуха

Kiran Das says:

which material is used to stick the bearing?????

Hitesh Nanda says:

Bro how to convert the mechanical power to electrical?

Yashmeet Saini says:


bed not bad says:


Kirpak Dini says:

Useless….motor is driving the turbine….

Naresh Tanwer says:

वाह भाई जी क्या चीज बनाई हो दिमाग तो है वास्तव में

Jay Reynolds says:

most popular or not, when I watch a DIY video, I like to hear the person explaining the process as their doing it. It’s part of the benefit of having an audio visual interface. If I wanted to listen to music, I would, and I would choose the music, but my options with this are to leave the annoying music playing, or to mute the video. In either case, I don’t like the absence of commentary.

For anyone who doesn’t like commentary, and also loves this music, they could mute a commentary track and play the music on another device or app.

People like me who want to puke when this track starts with a video have no comparable option.

Stop playing stupid music with diy tutorials that could also benefit from audio commentary.

And for those of you who say I can just not watch. Yes, that’s true and I don’t, which is part of the reason this irritates me. It’s annoying to lose the benefit of what could have been an excellent tutorial because somebody somewhere decided this song is the perfect tutorial accompaniment.

I wouldn’t want my favorite song playing over a diy tutorial, but if I did, I would play it myself.

So in answer to anyone who says I just don’t have to watch, I say, you don’t have to read my bitching. But I am going to keep. bitching, and idiots are going to keep putting this song on their DIY tutorials.

kura Kurd says:

He Can I translate your video to kurdish language ,here we have a good wind blow but nobody knows how to make wind turbine at home

Rathina kumar kongu says:

Impressive r u Kerala!!!

pooja thakare says:

Can you plz share the details of parts which are
required here

Dean Elliott says:

That music makes me crazy…… aborted.

saikat debbarma says:

Mother fucker running wind mill with motor and battery

Muhammad Suleman says:


Kamlesh Satani says:


Haz LAn says:


Pardesi Jan says:


Chris Gray says:

Very cool 🙂

sharad ingle says:

Bhai ek no.
par iska output dikha ya nahi?

Amaresh Reddy says:

nice man

Khan Dasthageer says:

Hi brother ideas to cool how to control power please explain me

Everton Silva - Vivendo com Ideias says:


Raju Gupta says:

You can Call me 8898069712

Manas Ranjan Mohanta says:


Lao Lao says:

When all the other Indians googled bobs and vegene, this one googled renewable energy

SRH Videos says:

Bro can I have your contact number… can I speak with you.

Varun Prasannan says:

for those who wanted to buy a ready-made wind turbine can check this link

aaruñ kiran says:

Really Gud bro

Amrinder singh says:

murkh kyu bna rhe ho koi v tree ka ptta nhi hil rha h ye fan motor se rotate kr rha h na k fan motor ko rotate kr rha h
wall fan hota toh dikhana chaaiye tha

Praveen Wajape says:

How to save energy and 1 bulp want minimum 230volt so whatever you did it’s good but this one can make also but we can’t apply this any where

Narender Pal Singh says:

Really apreciable and practical. Please also show other parts to charge the battery.

Tukuen Rek says:

Ide yang sangat bagus

Pro Gamer says:

Сварщик уровня ” БОГ “

pooja thakare says:

Can you plz share the details of parts which are
required here

Majid Khan says:

Bhut difficult h bhai

潘瑞維Ravi Shankar Pandey says:

Nicely explained

Ruponti Bangla says:


Anand Prasad says:

Good.I had also made in my childhood before 10 years.

Gyanendra Kumar says:

Nice work but when you give some electric load on output current speed would be very slow, and for better current u can use any r.o. moter which can be generate 24 volt with high ampier also with a small inverter circuit u can convert the voltage into 220 ac.

Shaik rahamthulla says:

Congratulations bro very interesting.

Kamlesh Satani says:

Kya price he

Boopathy G says:

Mass bro

Muzamil Shah says:


You haven’t weared face shield and also there was no any guard on grinder disc kindly be safe

Evgen Petsko says:

You can find something like this on the Avasva page. Full step-by-step instructions right on your desk.

 Write a comment


Do you like our videos?
Do you want to see more like that?

Please click below to support us on Facebook!